If your work involves heating metal, joining, melting, casting, forging or just warming a part so it slips onto a shaft – the heat source you choose will shape everything that follows. It sets your cycle times. It sets your scrap rate. It sets your power bill. It sets how safe your shop floor feels. Therefore, the change from gas flames and fuel-heated furnaces to induction heating equipment is being adopted by more and more manufacturers.
At Teltech, we design and build induction heating systems for industries, foundries, tool rooms and jewellery workshops. Some customers come to us for a standard machine they can put to work the same week. Others need something built around a single part. Most land somewhere in between. This page walks you through our full range, what each type of equipment does best, and how to work out which one fits your production.
All induction equipment works on the same basic idea. An alternating current flows through a copper coil and creates a magnetic field. Place a metal part inside that field and it heats up from within, quickly and without any flame touching it. What changes from one machine to the next is the power, the frequency, the coil design and what happens around the heating. Here’s a quick look at the five main families we build.
The induction heater is the most versatile tool of the bunch. It can be used for preheating, hardening, tempering, annealing, forging or shrink fitting, often on the same machine just by changing the coil. An industrial induction heater applies heat exactly where you want it, and nowhere else, so you are not wasting energy heating the entire part or the air around it.
Induction brazing is a method of joining metal parts by melting a filler alloy into a close joint. We use our induction brazing equipment for copper tubing, brass fittings, carbide tools, busbars and much more. The heat cycle is controlled by the machine , not an operator ‘s eye. Every joint comes out the same.
An induction melting furnace melts solid metal into liquid very fast and no combustion gasses mix into the melt. Also the electromagnetic field naturally stirs the molten metal helping to keep the alloy even. An industrial induction melting furnace is suitable for steel, iron, copper, brass, aluminum and more, from small lab batches up to full production heats.
When you work with gold, silver or platinum, every gram counts. Gold melting machines give jewelers and refiners a clean and controlled melt, with very little loss of metal. For higher volumes, an industrial gold melting furnace can provide greater capacity, while still maintaining the same tight temperature control.
An induction casting furnace melts the metal and pours it into a mould, often in a single, controlled sequence. Foundries use an industrial induction casting furnace to get consistent castings with fewer defects, whether they’re pouring small precision parts or larger components.
Our induction brazing machines range from compact benchtop units for tool rooms to fully automated induction brazing systems that run around the clock on a production line. In between, there are portable heaters for large assemblies that can’t be moved and semi-automatic stations where an operator loads the part and the machine does the rest.
What ties them together is control. You set the power, the time and, where needed, the target temperature. The machine then repeats that exact heat cycle on every part, shift after shift.
Flame brazing has been around for a long time, and a skilled brazer can do great work with a torch. The trouble is that skill is hard to find, hard to keep, and hard to repeat across a whole team. Induction brazing takes that variability out of the process.
Here’s what our customers usually notice first. Joints heat in seconds rather than minutes, so throughput goes up. Only the joint area gets hot, which protects nearby seals, plastic parts and heat-treated sections. There are no oxygen or acetylene cylinders on the floor, so the shop is safer and cooler to work in. And because every heat cycle is saved as a recipe, quality stops depending on who’s working that day.
Induction brazing equipment also uses energy far more efficiently than a flame, since you’re heating the joint and not the surrounding air. Over a year of production, that difference shows up clearly on the power bill.
If you’d like to go deeper, our guide What Is Induction Brazing? Process, Advantages, and Applications covers the full process step by step.
Automotive and aerospace parts rarely come in simple shapes, and their quality requirements leave very little room for error. That’s why many of the industrial induction brazing machines we supply to these sectors are built to order.
For automotive lines, that might mean a multi-station rotary table brazing AC lines, fuel rails or EV busbars at line speed, with automatic loading and in-line leak testing. For aerospace, it’s more often about precision and traceability: controlled atmosphere or vacuum brazing, closed-loop temperature control and full data logging for every joint. In both cases, we start with your part and your process, then design the coil, fixturing and controls around them.
Not every job is brazing or melting. A lot of the time, you just need to get a specific part of a component to a specific temperature, quickly and reliably. That’s where a general-purpose induction heating machine earns its place.
Our induction heater units are built to be adaptable. Swap the coil and the same machine can go from preheating a weld joint in the morning to hardening a shaft in the afternoon. They’re used in forging shops, maintenance departments, heat treatment lines and R&D labs.
In forging, an industrial induction heater brings billets and bar ends up to forging temperature in a fraction of the time a gas furnace takes. The heat goes straight into the metal, so there’s less scale on the surface, less material loss and a much cooler working area for your team. Feeders and conveyors can be added so billets come out hot and ready, one after another, in step with the press.
Shrink fitting is another everyday use. Heat a bearing, gear or coupling and it expands just enough to slide onto a shaft. Let it cool and you’ve got a tight interference fit with no hammering and no damage. Induction does this in minutes, evenly, and without the open flames or oil baths that older methods relied on. It works just as well in reverse when you need to remove a part during maintenance.
Modern induction heating equipment is as much about control as power. All induction heating systems we build include digital controls enabling your team to set and save heating profiles, monitor output in real time and repeat the same cycle as many times as needed.
Add an optical pyrometer and the system can hold a set temperature all by its lonesome, automatically adjusting power as the part heats up. Plug it into your PLC and it’s part of your larger line, alarms, interlocks and production data, all in one place.
Efficiency is built in. Solid-state power supplies take most of the power from the grid and convert it to heat inside the part. The system only draws real power while it is heating. There’s no warm-up period and nothing idling between cycles. For many of our customers, that alone makes a noticeable difference to running costs.